Zoom/Dimmer Settings; White Color Calibration - SHOWTEC Performer 2000 Fresnel DDT MKII V1 Manual

Performer 2000 Fresnel DDT MKII

3. Zoom/Dimmer settings

You can enter the Zoom/Dimmer settings by pressing the ZOOM/DIMMER controls (on the control panel
(37)) twice. You can also gain access by following the instructions below.
01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) Press the UP/DOWN buttons to toggle between the 2 options:
04) When the display shows
05) Press the UP/DOWN buttons (or turn the ZOOM control on the control panel (37)) to
increase/decrease the zoom factor. The adjustment range is between
small to big.
06) When the display shows
07) Press the UP/DOWN buttons (or turn the DIMMER control on the control panel (37)) to
increase/decrease the dimmer intensity. The adjustment range is between
from dark to brightest.

4. White color calibration

01) While in the main menu, press the UP/DOWN buttons until the display shows
02) Press the ENTER button to open the menu.
03) If the display shows
04) Insert the key combination by pressing the buttons in the following order: UP, DOWN, UP, DOWN,
ENTER. The display will show
05) Press the ENTER button to proceed to zoom range selection.
06) Press the UP/DOWN buttons to choose one of the 2 options:
07) Once you have chosen one of the 2 zoom ranges, press the ENTER button to open its submenu.
08) Press the UP/DOWN buttons to increase/decrease the zoom factor. The adjustment range is between
Ordercode: 33037
Zoom
Dimmer
, press the ENTER button to open the zoom settings.
, press the ENTER button to open the dimmer intensity settings.
, you need to insert a key combination which will unlock the menu.
.
, from small to big.
or
19
.
, from
,
.
.