Measurement Errors; Entering The Patient Identification - Macherey-Nagel URYXXON Relax User Manual

5.3 Measurement errors

If the display shows a measurement error (e.g wrong strip) instead of a result please read the
instructions in Chapter 13 "Error Messages and Fault Clearance".
Repeat the measurement. In case of permanent errors please contact MACHEREY-NAGEL
service.
Measurement errors will be printed and send according to the instrument settings..

5.4 Entering the patient identification

The patient identification needs to be entered before starting the analysis. This can be done as
follows:
• Directly on the equipment: Pressing
keypad. Enter the ID using the keys. To enter characters (i. e. "Miller") press
the character entry. Repeated pressing on the same field within 0.5 seconds switches
through the characters displayed on the key. Wrong entries may be erased by pressing
.
1234567890
1 2
4 5
7 8
Display 6: Entering ID (numeric)
• Using a standard PC-keyboard: Connect the keyboard to the instrument. User inputs on
the keyboard will automatically be interpreted as patient identifications.
• Using a bar code reader: Connect the barcode reader to the instrument. Barcode readings
will automatically be interpreted as patient identifications.
After entering the patient identification start the measurement. The patient identification is
saved together with the diagnostic findings.
A new ID cannot be entered before the present analysis has been completed.
Manual URYXXON
80
ID:
ID
3 ABC
6
9 0
Relax EN, V 6.03 / 08.22
®
in the start menu brings up an alphanumeric
–
GHI
PQRS
Display 7: Entering ID (letter)
NOTICE
to change
ABC
ID ID
ABCDEFGH
ABC DEF 123
JKL MNO
TUV -(#)
WXYZ