Analysis Of Test Strips; How To Perform A Measurement - Macherey-Nagel URYXXON Relax User Manual

5. Analysis of test strips

5.1 How to perform a measurement

The URYXXON Relax is very easy to use. In order to start the measurement, the test strip
®
is placed on the strip holder. The instrument automatically detects a new strip and starts
the measurement. A progress bar appears, that indicates the remaining analysis time. After
30 seconds the test strip is drawn into the instrument.
Make sure to remove excess urine by blotting the test strip carefully on a lint-free cloth
(Chapter 9.5 "How to deactivate and activate the autostart").
For details on sample handling please refer to Chapter 1 "Quickstart".
If auto mode (Chapter 9.5 "How to deactivate and activate the autostart") is deactivated,
the analysis needs to be started by pressing
After the measurement, the instrument will release the analyzed test strip which can now be
discarded. The result is displayed on the screen and is transferred via the interfaces and/or
printed according to equipment settings.
For additional information on the test strip, please read the instruction leaflet that comes with
the strips.
Biological Hazard: Urine residues and used test strips bare the danger of infection.
Always use protective gloves during handling and disposal. The disposal of used
test strips should be performed according to the regulations of the handling of potentially
infectious material.
Manual URYXXON
78
NOTICE
NOTICE
CAUTION
Relax EN, V 6.03 / 08.22
®
on the touch-screen.