Measurement Errors; Entering The Patient Identification - Macherey-Nagel URYXXON Relax User Manual

5.3. Measurement errors

If the display shows "Measuring Error ..." instead of a result please read the
instructions in Chapter 13 "Error Messages and Fault Clearance".
Repeat the measurement. In case of permanent errors please contact
MACHEREY-NAGEL service.

5.4. Entering the patient identification

The patient identification needs to be entered before starting the analysis. This
can be done as follows:
• Directly on the equipment: Pressing
numeric keypad. Enter the ID using the keys. To enter characters (i.e. "Miller")
press to change the character entry. Repeated pressing on the same
ABC
field within 0.5 seconds switches through the characters displayed on the key.
Wrong entries may be erased by pressing
ID
1234567890
1 2
4 5
7 8
Display 6: Entering ID (numeric)
• Using a standard PC-keyboard: Connect the keyboard to the instrument. User
inputs on the keyboard will automatically be interpreted as patient identifica-
tions.
• Using a bar code reader: Connect the barcode reader to the instrument. Bar-
code readings will automatically be interpreted as patient identifications.
After entering the patient identification start the measurement. The patient iden-
tification is saved together with the diagnostic findings.
NOTE:
A new ID cannot be entered before the present analysis has been completed.
Manual URYXXON
ID:
3 ABC
6
9 0
®
Relax EN, V5.00 / 04.19
Manual URYXXON
in the start menu brings up an alpha-
.
ABCDEFGH
– ABC DEF 123
GHI JKL MNO
TUV
PQRS
Display 7: Entering ID (letter)
®
Relax
ID ID
-(#)
WXYZ
81