Scaleo medical Poweo 300 User Manual page 23

2. Roll the patient onto his side. Put the folded sling behind his back.
The center of the sling should be parallel to the spine of the user.
Then roll the patient over onto his back.
3. Pull the legs loops of the sling forward and under the thighs.
4. If you are using a 4-point sling, cross
the loops one through the other. This
step is not necessary for the electric
tilting suspension slings.
5. Position the legs of the patient lifter under the bed with the
suspension over the user. Be careful not to lower the suspension
onto the patient.
If the bed of the patient can be lowered, it should be lowered as
much as possible before the lifting starts. Raising the head support
can also be helpful.
6. Center the suspension across the patient the patient before
starting to lift.
Remember that the wheels should not be locked.
7. When all four loops are hooked in the suspension, raise the
patient carefully using the remote control.
8. Repositioning the patient while being raised may be needed to
attain a safe and comfortable sitting position. For this, use the
handle on the back of the sling.
23
4-point sling installation
DOMU124_EN_v2_20221206_Poweo® 300 User manual
Electric sling installation