Scaleo medical Poweo 300 User Manual page 12

Position the battery into its compartment, and guide it for the best electrical contact
between the battery and battery support contacts.
Step 9: Connect the remote control.
Connect the remote control with the plug and make sure that the wire
connection is aligned with the mast remote control port. Once aligned, press
on the wire to insert the plug.
Step 10: Test the lifter.
Try lifting and lowering, opening and closing the legs to make sure that everything is in order.
Step 11: Remove the battery and recharge it.
Before first use, the battery must imperatively be 100% charged. Please refer to the "Battery
management" section for this operation. Your lifter will be ready for use as soon as the battery is
charged.
Whenever possible, keep the carton box and packing accessories for later transportations.
Commissioning the Poweo
SCALEO Medical provides a universal power supply adapted to any voltage/frequency
value. Before charging the battery you will need to check that the plug provided fits to
your local AC outlet.
If the place of use was informed before ordering, SCALEO Medical will provide the right type
of AC cord.
Before first use, the battery must imperatively be 100% charged.
Before each use check for correct installation of the lifter and of its accessories, verify proper
operation before use with a patient.
DOMU124_EN_v2_20221206_Poweo® 300 User manual
® 300
12