IBM 3745 Connection And Integration Manual page 62

LIB Position 2 (M-A1)
032 036 040 044
033 037 041 045
2
034 038 042 046
035 039 043 047
LIB Position 1 (M-A2)
000 004 008 012
001 005 009 013
1
002 006 010 014
003 007 011 015
Step
2-14
3745 All Models & 3746-900: CIG
For the Model 150 only
LIB position 1 (lower left) is equipped with a LIB type 3 having only
four LIC positions. The port numbers are unchanged.
112
048 052 056 060
049 053 057 061
050 054 058 062
051 055 059 063
112
016 020 024 028
017 021 025 029
018 022 026 030
019 023 027 031
Note: For board 3, if a LIB type 1 is installed, use the figures that are
not in parentheses for the port numbers; for a LIB type 2 (no longer
available from IBM), use the figures in parentheses.
If you are only installing a LIC, go to Step 4 on page 2-15.
If you are only plugging in a LIC cable, go to Step 8 on page 2-16.
Otherwise, continue with the next step.
3
Deactivating the lines
Ask the host operator to deactivate all the lines connected to the LIC
you want to work with.
Attention
Deactivation of all the lines of the LIC is necessary to prevent
problems at line adapter restart.
The line number is the same as the LIC port number.
For LIC types 1, 3, and 4:
There are up to four lines per LIC.
For LIC types 5 and 6:
Refer to the LIC5/6 Migration and Integration Guide, SA33-0416 or
earlier version of the Connection and Integration Guide, SA33-0129.
LIB Position 4 (L-A1)
080 082 084 086
4
081 083 085 087
LIB Position 3 (L-A2)
128 132 136 140
(64) (66) (68) (70)
129 133 137 141
3
130 134 138 142
(65) (67) (69) (71)
131 135 139 143
088 090 092 094
089 091 093 095
144 148 152 156
(72) (74) (76) (78)
145 149 153 157
146 150 154 158
(73) (75) (77) (79)
147 151 155 159