Step
Operator console and
RSF cable connector
area
Token-ring
adapter connector
area
CPC cable
connector
Figure 2-1. Non-LIC Connector Location
Otherwise, continue with the next step.
3
Locating communication line and service connectors
Locate the area of non-LIC connectors, that is communication line and
service connectors. See Figure 2-1.
High-speed scanner or
Ethernet LAN attachment
connector area
If you have a 3745 Model 17A
You have only the customer power control (CPC) connector
available for user access.
You do not have connectors for the operator console and for the
remote support facility (RSF) console.
Installing or changing the service processor or cable is an IBM
service representative task.
When you have located the connector(s), go to the following sections as
needed:
"Unplugging or Plugging In an Operator Console Cable" on
page 2-9
"Unplugging or Plugging In the Remote Support Facility (RSF)
Cable" on page 2-11
"Removing or Installing the Customer Power Control (CPC) Cable"
on page 2-12.
For communication lines, continue with the next step.
Chapter 2. 3745 Models 130 to 17A: Connecting LICs and Cables
2-3