Danfoss MAH Series Service Manual page 12

Service guide | Disassembling and assembling MAH 6.3 - 12.5
12
23. Mount O-ring on front cover.
25. Press shaft seal into front cover using
shaft seal tool. Ensure that it is pressed to
the bottom.
27. Tighten screws to a torque of 7 Nm.
180R9152 | AX357937856579en-000402 | 07.2021
24. Wet shaft seal with water and mount it in
front cover. .
26. Mount front cover and align it to screw
holes.
28. Motor assembled.