Default Ip Gateway Settings - Cayman Systems 3220-H User Manual

Cayman 3220-H User's Guide
December 2000
set ip ethernet rip-send-keyid keyid
Specifies the authentication key that will be included with all
outgoing RIP packets if
authentication key must match the key the remote router is
expecting, or the RIP update will be ignored. RIP authentication
keys can be 1-16 characters long, and can include spaces and special
characters. You must enclose the authentication key string in double
quotes ("").
set ip ethernet rip-receive-keyid keyid
Specifies the key that will be used to authenticate all incoming RIP
packets if is selected for
v2-MD5
3220-H receives a RIP packet, it uses the expected key to create an
MD-5 digest of the RIP message. It then compares this calculated
digest to the MD-5 digest sent with the RIP packet. If the calculated
digest does not match the received digest, the RIP message is
discarded. If the two digests match, the packet is processed as a
normal RIP-2 packet.
IP authentication keys can be 1-16 characters long, and can include
spaces and special characters. You must enclose the authentication
key string in double quotes ("").

Default IP Gateway Settings

set ip gateway option { on | off }
Specifies whether the Cayman 3220-H should send packets to a
default gateway if it does not know how to reach the destination
host.
set ip gateway interface { ip-address | ppp-vccn }
Specifies whether the gateway is reached using a fixed IP address or
through a PPP virtual circuit.
is selected for
v2-MD5
. When your Cayman
rip-send
Using the Command Line Interface
. This
rip-send
4-29