Configuring Your Computer - Cayman Systems 3220-H User Manual

Configuring Your
Computer
Cayman 3220-H User's Guide
December 2000
Field Name Description
RIP-Receive Specifies how your Cayman
3220-H learns about the
Version
routes maintained by other
routers accessible through the
virtual circuit.
PAP Specifies the PAP username
used to authenticate the
Username
connection on VCC1.
PAP Specifies the PAP password
used to authenticate the
Password
connection on VCC1.
CHAP Specifies the CHAP username
used to authenticate the
Username
connection on VCC1.
CHAP Secret Specifies the CHAP secret used
to authenticate the connection
on VCC1.
The following instructions assume that you want all devices on your
workgroup Ethernet network to use IP addresses on the 192.168.1.0
local area network. If your workgroup network must use another
network number, refer to Entering Ethernet (LAN) Settings on page
3-15 for information on how to change the IP address of the LAN
interface for the Cayman 3220-H.
1. Configure your computer to use an IP address on the
same TCP/IP network as the Cayman 3220-H.
If you are using Windows 95/Windows 98/Windows NT:
a. Open the Network Control Panel and select the TCP/IP
service for the Ethernet card in your computer (for
example, TCP/IP ->3Com EtherLink III).
b. Open the Properties window.
Your
Information
Choose one:
V1
V2
V1-compatible
Configuring Your Cayman 3220-H
3-7