Table of Contents
Advertisement
Cayman 3220-H User's Guide
December 2000
set PPP module vccn mru integer
Specifies the Maximum Receive Unit for the virtual PPP interface.
The
argument can be any number between 128 and 2048.
integer
By default, the MRU value for the virtual PPP interface is 1500.
set PPP module vccn async-map map
Specifies the asynchronous control character map for the PPP link.
The default value for the
set PPP module vccn magic-number { on | off }
Enables or disables LCP magic number negotiation. By default, magic
number negotiation is turned on.
set PPP module vccn protocol-compression { on | off }
Specifies whether you want the Cayman 3220-H to compress the PPP
Protocol field when it transmits datagrams over the PPP link. By
default, protocol field compression is turned on.
set PPP module vccn address-compression { on | off }
Specifies whether you want the Cayman 3220-H to compress the
HDLC Address and Control fields when it transmits datagrams over
the PPP link. By default, address field compression is turned on.
set PPP module vccn lcp-echo-requests { on | off }
Specifies whether you want your Cayman 3220-H to send LCP echo
requests. By default, LCP echoing is turned on. You should turn off
LCP echoing if you do not want the Cayman 3220-H to drop a PPP
link to a nonresponsive peer.
set PPP module vccn failures-max integer
Specifies the maximum number of Configure-NAK messages the PPP
module can send without having sent a Configure-ACK message. The
integer argument can be any number between 1 and 20. The default
value for the maximum failure count is 10.
argument is
map
0x00000000
Using the Command Line Interface
.
4-39
Advertisement
Table of Contents
