Table of Contents
Advertisement
About Your Cayman 3220-H
1-2
Integrated 10BaseT Ethernet hub on the Cayman 3220-H front
panel lets you add or move workgroup network connections
quickly and easily.
SWIFT-IP™ means that installing the Cayman 3220-H consists of
connecting the device to your networks and entering a few basic
settings. You can install and configure the Cayman 3220-H in less
than 10 minutes.
Web-based browser configuration makes configuration and
management easy from anywhere on your network.
Command-line configuration lets you monitor the 3220-H
through a Telnet or VT100 connection.
Full-featured wide-area network bridge supports non-TCP/IP
protocols.
Network Address Translation (NAT) lets your workgroup
network share one IP address when communicating with other
hosts on your corporate network or the Internet.
Dynamic Host Configuration Protocol (DHCP) client
functionality lets your Internet Service Provider (ISP) or a host
on your Wide Area Network configure the IP address and other
network settings for the WAN interface on your Cayman 3220-H
automatically.
DHCP server functionality lets the Cayman 3220-H automatically
configure the IP address and other network settings for
computers on your Local Area Network.
DHCP relay agent functionality lets devices on the Local Area
Network obtain network address information from a DHCP
server on the WAN without any user setup at the workstation.
IP pinholes let you provide web services from your Local Area
Network without sacrificing network security.
Bandwidth shaping lets carriers and service providers regulate
the amount of WAN traffic.
Alcatel access concentrator interoperability.
Cayman 3220-H User's Guide
December 2000
Advertisement
Table of Contents
