Ppp Over Ethernet (Vc-Muxed) - Cayman Systems 3220-H User Manual

PPP over Ethernet
(VC-Muxed)
Cayman 3220-H User's Guide
December 2000
Off – Do not accept RIP messages from other routers.
RIP-1 – Accept routing information in RIP version 1 format
from other routers.
RIP-2– Accept multicast routing information in RIP version
2 format multicast by other routers.
RIP-1 Compatibility – Accept routing information in RIP
version 2 format broadcast by other routers.
You cannot use RIP when network address translation is turned
on.
14. Use the IP Gateway radio buttons to specify whether you
want this virtual circuit to use a gateway.
15. If you selected On in Step 14, use the Gateway Type list to
specify the type of gateway.
Options are:
Fixed IP Address – The IP gateway for this virtual circuit has
a fixed IP address.
PPP Port (VCC #) – The IP gateway for this virtual circuit is
accessible over the specified point-to-point link.
16. If you selected Fixed IP Address in Step 15, use the Gateway
Address field to specify the IP address of the default IP
gateway.
17. Click the Save button to store your modified
configuration in the Cayman 3220-H memory.
18. Click the Restart Cayman-DSL button on the Cayman
3220-H Home Page to restart your Cayman 3220-H with
the new configuration.
If you choose pppoe-vcmux on the ATM Configuration window
(Figure 3-6 on page 3-18) for a virtual circuit and click the Configure
button, the PPP over Ethernet (VC-Muxed) window (Figure 3-8) lets
you configure how the virtual circuit uses PPP framing and VC-based
multiplexing.
Configuring Your Cayman 3220-H
3-23