Table of Contents
Advertisement
Cayman 3220-H User's Guide
December 2000
Admin-Disabled – Router traffic is accepted over this port
but administration commands are ignored.
Admin-Only – Administration commands are accepted over
this port but router traffic is ignored.
8. Use the RIP-Send list to specify whether you want the
Cayman 3220-H to send Routing Information Protocol
(RIP) messages to other routers.
RIP lets your Cayman 3220-H inform other routers of routes
available through its interfaces. Options are:
Off – Do not send RIP messages to other routers.
RIP-1 – Broadcast routing information in RIP version 1
format.
RIP-2– Multicast routing information in RIP version 2
format.
RIP-1 Compatibility – Broadcast routing information in RIP
version 2 format.
You cannot use RIP when network address translation is turned
on.
9. Use the RIP-Receive list to specify whether you want the
Cayman 3220-H to accept Routing Information Protocol
(RIP) messages from other routers.
RIP lets your Cayman 3220-H learn about routes available
through other routers. Options are:
Off – Do not accept RIP messages from other routers.
RIP-1 – Accept routing information in RIP version 1 format
from other routers.
RIP-2– Accept multicast routing information in RIP version
2 format multicast by other routers.
RIP-1 Compatibility – Accept routing information in RIP
version 2 format broadcast by other routers.
You cannot use RIP when network address translation is turned
on.
Configuring Your Cayman 3220-H
3-45
Advertisement
Table of Contents
