Cayman Systems 3220-H User Manual page 34

Configuring Your Cayman 3220-H
3-12
Figure 3-3 QuickStart Window
To configure the QuickStart window:
1. Enter the name of your Cayman 3220-H in the System
Name field.
Each Cayman 3220-H is assigned a name as part of its factory
initialization. The default name for a Cayman 3220-H consists of
the word "Cayman-DSL" and the serial number of the device. A
device name can be 1-32 characters long and cannot include
spaces or special characters.
2. Enter the identifier you want your Cayman 3220-H to
send when the PPP link is being established in the
Username field.
This is the username the Cayman 3220-H sends in a PAP or CHAP
response packet. The information you enter must match the
CHAP username configured in the remote PPP peer's
authentication database.
3. Enter the password you want your Cayman 3220-H to
send when the PPP link is being established in the
Password field.
This is the PAP password or CHAP secret the Cayman 3220-H
sends. The information you enter must match the PAP
password/CHAP secret configured in the remote PPP peer's
authentication database.
Cayman 3220-H User's Guide
December 2000