Validating Your Configuration - Cayman Systems 3220-H User Manual

Validating Your
Configuration
Cayman 3220-H User's Guide
December 2000
option (off) [on | off]:
You can accept the default value for a field by pressing the Return
key. To use a different value, enter it and press Return.
You can enter the CONFIG step mode by entering
node of the CONFIG hierarchy. You can enter step mode for a
particular service by entering
Dogzilla (top)>>
Stepping set mode (press Control-X <Return/Enter> to
exit)
...
system
name ("Dogzilla"):
Diagnostic Level (High):
Stepping mode ended.
You can use the validate CONFIG command to make sure that your
configuration settings have been entered correctly. If you use the
command, the Cayman 3220-H verifies that all required
validate
settings for all services are present and that settings are consistent.
Dogzilla (top)>>
Error: Subnet mask is incorrect
Global Validation did not pass inspection!
You can use the
validate
settings at any time. Your Cayman 3220-H automatically validates
your configuration any time you save a modified configuration.
on
set service_name
set system
Mycroft
medium
validate
command to verify your configuration
Using the Command Line Interface
from the top
set
. For example:
4-19