How To Change The Text Of The Printout Header; How To Change The Definitions For Emergency Measurements; How To Change The Default User - Macherey-Nagel URYXXON Relax User Manual

NOTE:
The UTC time setting is only important when using the interface mode "Bidi-
rectional and Unidir. V2". The UTC will be sent together with the result.
9.17. How to change the print format
The information on the printout can be customized. By default the sequence
number, patient ID, operator ID, strip LOT, control LOT and empty fields will
be printed. To activate or deactivate the respective information on the printout
select the entry "Print format" in the menu "Instrument setup" and use the arrow
keys and to change the setting.
Activating the option "Print empty" will always print the chosen fields, even if they
are empty.

9.18. How to change the text of the printout header

Select "Customization" in the settings menu. The first two lines of the printout
may be filled with a user-specific identifier. Each line contains 23 characters.
To enter the text an external keyboard or the alphanumerical pad on the display
can be used. The keys on the touch-screen are linked to several letters. Re-
peated pressing within half a second switches through the letters displayed on
the key.

9.19. How to change the definitions for emergency measurements

®
The URYXXON Relax allows performing an emergency measurement to by-
pass different scenarios during instrument operation (e.g. patient ID unknown).
In case an emergency icon has been pressed to bypass a missing information,
the required field (e.g. patient ID) will be automatically filled with the text entered
in the menu "Emergency def.". To change the default settings select the entry
"Emergency def." in the menu "Instrument setup" and use the arrow keys to
choose the respective entry. To enter the new definition use the alphanumerical
pad on the display, an external keyboard or a barcode scanner. An overview
about the entered information can be obtained by printing the instrument set-
tings (Chapter 9.23 "How to print the settings").

9.20. How to change the default user

®
The URYXXON Relax starts with deactivated user mode by default. The default
user on the printouts is announced as "Default user". The name of the default
user, which will be stored, printed and send can be changed selecting the entry
"Default user" in the menu "Instrument setup". To enter the new definition use
Manual URYXXON
Manual URYXXON
®
Relax EN, V 5.00C / 06.19
®
Relax
43