Manual URYXXON
5.5. Measurement errors
If the display shows a measurement error (e.g wrong strip) instead of a result
please read the instructions in Chapter 14 "Error Messages and Fault Clear-
ance".
Repeat the measurement. In case of permanent errors please contact
MACHEREY-NAGEL service.
Measurement errors will be printed, send and stored according to the instru-
ment settings.
5.6. Changing the sequence number ("SN")
Pressing
in the start menu brings up a numerical pad. Enter a new se-
SN:
quence number using the keys on the pad. All following measurements will now
be counted starting from this number.
5.7. Transferring data to a PC
The results may be transferred to a PC via the USB- or RS232-interface.
A more detailed description of the interface can be found in Chapter 13 "Inter-
face description".
26
®
Relax
Seq.No.
1234
1
2
3
4
5
6
7
8
9
Display 10: Seq.-Input
Manual URYXXON
0
®
Relax EN, V 5.00C / 06.19