How To Modify The Strip Type; Administrator Settings; How To Modify Strip Settings; Type - Macherey-Nagel URYXXON Relax User Manual

Manual URYXXON

9.2. How to modify the strip type

®
The URYXXON Relax has data for various approved test strip types. The test
strip type can be chosen in a selective list.
In the "User settings" menu, the test strip type can be changed. Confirm the
entry "Strip" in the user settings followed by confirming "Type" in the strip pa-
rameter settings. The required test strip can be chosen from the list. The chosen
strip type will be the active strip in the measurement menu.

9.3. Administrator settings

®
The URYXXON Relax allows a user management. Ex works the instrument is
set to "Open mode", meaning no users are set and every user is allowed to do
any changes. The instrument settings can be changed by choosing the list entry
"Admin settings" in the settings menu (Display 26).
NOTE:
When the user mode is activated, only users with the role "Change settings"
are allowed to enter the "Admin settings" ("Chapter 9.6 "How to create a new
user"").

9.4. How to modify strip settings

In the "Strip" menu, settings for result displaying and the different test strip types
can be chosen.

9.4.1. Type

When the instrument has data for various approved test strip types, the strip
type can be chosen from a selective list (Chapter 9.2 "How to modify the strip
type").

9.4.2. Units

®
The URYXXON Relax can report the results in different units:
• Conventional (e.g. 10 mg/dL)
• SI (e.g. 56 mmol/L)
• ARB, Plus-System (e.g. +++)
• Conventional + ARB
• SI + ARB
Choose the desired unit from the selective list. For the strip parameter Microal-
bumin the results can only be shown in conventional units.
NOTE:
In the interface modes "Unidir. V2" and "Bidirectional" the result will be send
via the interface containing all available units (Conventional, SI and ARB).
36
®
Relax
Manual URYXXON
®
Relax EN, V 5.00C / 06.19