How To Print A User List; Qc-Setup; How To Set A Qc Reminder - Macherey-Nagel URYXXON Relax User Manual

Medi-test

Hide thumbs Also See for URYXXON Relax:

Table of Contents

entered user name and password are validated against a user list on the remote

system. After successful validation, the user can operate the instrument accord-

ing to the activated user roles.

NOTE:

In bidirectional mode the user management is only possible, when a user list

is active on the remote system.

10.3. How to print a user list

To print a list of users select the list entry "Print users" in the menu "User man-

agement". The instruments prints a list of the first 100 users stored on the re-

mote system with their respective roles and the user status (Active or Inactive).

The order of the user list is based on the order in the remote system.

For general information on the QC-setup please refer to Chapter 9.9 "QC-setup".

When activated the device will display the advisory message "QC measure-

ment required" each time the reminder is due (Display 32). The instrument will

be locked for patient testing. An emergency measurement is still possible, if this

setting is activated.

To release the instrument for patient testing, please perform a positive and a

negative QC measurement by pressing

When QC-evaluation is set to "QC user" (see Chapter 9.12 "How to set the

QC evaluation"), the results need to be evaluated by the user as being passed

or failed. Both measurements need to be evaluated as "Passed" to unlock the

Manual URYXXON

URYXXON STICK 10

QC period lapsed!

Please run QC.

(P)

Display 32: QC lockout

Relax EN, V 5.00C / 06.19

Relax

Table of Contents