5.2. Entering the patient identification
The patient identification needs to be entered before starting the analysis. This
can be done as follows:
• Directly on the equipment: Pressing
numeric keypad. Enter the ID using the keys. To enter characters (i.e. "Miller")
press
to change the character entry. Repeated pressing on the same
ABC
field within 0.5 seconds switches through the characters displayed on the key.
Wrong entries may be erased by pressing
ID
1234567890
1
2
4
5
7
8
Display 4: Entering ID (numeric)
• Using a standard PC-keyboard: Connect the keyboard to the PS/2 jack in the
backside of the instrument. User inputs on the keyboard will automatically be
interpreted as patient identifications.
• Using a bar code reader: Connect the barcode reader to the PS/2 jack in the
backside of the instrument. Barcode readings will automatically be interpreted
as patient identifications.
After entering the patient identification start the measurement. The patient iden-
tification is saved together with the diagnostic findings.
NOTE:
A new ID cannot be entered before the present analysis has been completed.
Manual URYXXON
ID:
3
ABC
6
9
0
®
Relax EN, V 5.00C / 06.19
Manual URYXXON
in the start menu brings up an alpha-
.
ABCDEFGH
–
ABC DEF 123
GHI
JKL MNO
TUV
PQRS
Display 5: Entering ID (letter)
®
Relax
ID ID
-(#)
WXYZ
23