How To Change The Interface Settings; How To Print The Settings - Macherey-Nagel URYXXON Relax User Manual

Medi-test

Hide thumbs Also See for URYXXON Relax:

Table of Contents

Press

behind the entry "Backlight" to enable or disable the backlight of the

display.

Both settings will only apply when the instrument is operated with batteries.

To increase the lifetime of the batteries, the LCD backlight and the printer can

be turned off using these options.

9.22. How to change the interface settings

Select "Interface" in the settings menu. The data transfer via the interfaces

can be activated or deactivated via an option panel. By default the interface is

switched on and set to "Unidir. V1" interface mode. To switch off the data transfer,

please press the currently filled entry. The different interface modes offer the

following options:

• Unidir. V1: Unidirectional ASCII protocol to report patient results

• Unidir. V2: Advanced ASCII protocol to report patient results and quality con-

trol results with comprehensive information on user, device serial number,...

• Bidirectional: Interface mode for bidirectional communication with remote soft-

ware tools (e.g. connection to POCcelerator™ from SIEMENS)

ATTENTION:

Setting the instrument to bidirectional interface mode without connection to a

remote system will reduce the functionality to a limited number of options and

will only allow for a limited number of emergency measurements.

NOTE:

A comprehensive description of the interface data protocols can be obtained

from your local product representative or MACHEREY-NAGEL directly.

Select "Print Settings" in the settings menu to print the equipment settings for

documentation purposes. Information with an asterisk mark activated functions.

Thermal printings fade with time. Therefore, please store it in a dark place or

copy the printout.

Manual URYXXON

Relax EN, V 5.00C / 06.19

Relax

Table of Contents