Table of Contents
Advertisement
Manual URYXXON
10. Device settings in bidirectional interface mode
NOTE:
®
The URYXXON
mode ex works. To operate the instrument in bidirectional interface mode,
please refer to chapter "Chapter 9.22 "How to change the interface settings"".
When set to bidirectional interface mode, changes to the device settings will
apply. In following these changes and additional settings are described in detail.
ATTENTION:
When activating the bidirectional interface mode in the interface settings, make
sure that the device is connected to a remote system, which is programmed to
communicate with the instrument. Otherwise, the instrument will only offer the
possibility of emergency measurements!
Switching on the instrument will start the automatic self-test followed by a status
request of the instrument to the remote system. The instrument is able to receive
a list of LOT-numbers, comments and messages from the remote system. Fur-
thermore, an exchange of information on patient data and the QC-status takes
place during use of the instrument. A popup message indicates an ongoing
information exchange.
NOTE:
In case the connection to the remote systems fails, a communication error will
be displayed accompanied by a warning sound. In this case only emergency
measurements of patient tests are possible. These results are stored on the
instrument and send to the remote system automatically after establishing the
next successful connection.
NOTE:
Changing the instrument from bidirectional to unidirectional mode is only pos-
sible, if the instrument is connected to a remote system. Otherwise a system
reset is required (Chapter 12.1 "How to reset the system (Load Default)").
10.1. Administrator settings
10.2. User management
In bidirectional mode, the URYXXON
different users. When access control is activated (see Chapter 9.21.5 "How to
activate the user accounts and user password"), a user login is required at each
instrument start and each time the instrument is reactivated from standby. The
46
®
Relax
Relax is configured to operate in unidirectional interface
Manual URYXXON
®
Relax allows for an access control with
®
Relax EN, V 5.00C / 06.19
Advertisement
Table of Contents
