Display Options
NO PRIORITY
AUX PORT MODE
Note: Do not change this setting from the default value.
Configures the usage of the SGPIO and fanout cable.
AUX PORT MODE
0
Disk Speed
Note: Do not change this setting from the default value.
Configures the maximum transfer speed of the hard drives. This setting is fixed to "3Gbps".
Disk Speed
3Gbps
FAN SPEED TEMP
Configures the fan speed from two types. If the temperature around the RAID controller exceeds the specified value,
the fan speed will become faster automatically.
FAN SPEED TEMP
50deg.C
FLUSH CACHE
Enables or ignores the "FLUSH CACHE" command.
Ignore
FLUSH CACHE
Display Options
Ignore
Enable
WRITE BACK MAX SIZE
Configures the size of sequential write data to save in the cache memory. If larger size sequential data will be
written, the data will first be divided into the specified size, then written.
WRITE BACK MAX
SIZE 4MB/CH
WRITE RETRY MODE
This mode will let the recovery process temporarily operate in the controller if an error is detected in the read and
write process.
WRITE RETRY
MODE
Display Options
WRITE RETRY MODE
Description
Enables NCQ. Available commands will be processed first.
Description
Ignores the "FLUSH CACHE" command. (Default)
Enables the "FLUSH CACHE" command.
Description
Enables the recovery process. (Default)
29