Table of Contents
Advertisement
USB3.0 HOST
Enables or disables the USB 3.0 port on the unit.
USB3.0 Host
Disabled
Display Options
USB3.0 Host
Enabled
USB3.0 Host
Disabled
RECOVER WAIT
Configures the priority between data access and the recovery process.
RECOVER WAIT
TIME 0.1 Sec
Note: Do not change this setting from the default value.
Display Options
RECOVER WAIT
TIME 0 Sec
RECOVER WAIT
TIME 0.1 Sec
RECOVER WAIT
TIME 1 Sec
RECOVER WAIT
TIME 10 Sec
RECOVER RATE
2Min./GB
5Min./GB
10Min./GB
20Min./GB
CACHE SIZE
Configures the equipped cache memory size.
The "Cache Buffer Error" message may be displayed if the configured memory size is different from the actual
memory size.
CACHE SIZE
1GB
Note: Do not change this setting from the default value.
Display Options
64MB
512MB
1GB
Description
Enables USB 3.0 port.
To use USB 3.0 port, configure "eSATA Host Speed" to "6Gbps" before
use.
Disables USB 3.0 port. (Default)
Description
Use this mode to prioritize recovery rather than data access in an
environment where data access is continuously active.
Starts the recovery process when 0.1 second passed since the last
data access. (Default)
Starts the recovery process when 1 second passed since the last data
access.
Starts the recovery process when 10 second passed since the last
data access.
Configures to recover 1 GB data within the specified time.
Note: The recovery process may not be finished in the specified time
depending on the environment.
Description
This option is for advanced users and should only be used if your
environment has a specific need for it.
Configures the cache memory size to 1 GB. (Default)
25
Advertisement
Table of Contents
