Buffalo HD-H Series User Manual page 9

Select the value to configure.
8
LCD Panel
This display shows the status of many current settings.
Rear
⑩
⑭
9
Power Connector
Use the included AC cable to connect to an UPS, surge protector, or outlet.
10
eSATA Port
Use if connecting the unit by the eSATA cable.
11
USB 3.0 Port
Use if connecting the unit by the USB cable.
12
LAN Port
This port is used for updating the firmware. Not in use normally.
13
Thunderbolt 2 Port
Use if connecting the unit to the host computer using a Thunderbolt cable, or in multi-unit cascade.
14
Init Button
Settings will be displayed when powering on while holding down the init button.
⑨
⑫
⑪
⑬
8