Buffalo HD-H Series User Manual page 54

12
Close the front cover with the key.
13
Turn the unit off first, then turn it on while holding down the mode button.
14
"RAID-0 NORMAL" will be displayed on the LCD panel.
RAID-0
NORMAL
15
Configure the port for connecting the computer and the unit, referring to the "Connecting the Unit" section in
chapter 2.
16
Format the drive referring to the "Formatting with NTFS (Windows)" or "Formatting with HFS Plus (Mac)"
section in chapter 7.
Drive replacement is finished.
For RAID 6:
1
Shut down the computer.
2
Open the front cover with the included key.
3
Confirm if the HDD LED is glowing in front. The LED for the failed hard drive number glows or blinks amber.
4
Push the unlock button for the two defective hard drives whose HDD LEDs glow amber and swing the locking
mechanism out.
Leave the hard drive cartridges whose HDD LEDs blink amber in the unit.
53