Chapter 4 Advanced Settings; Changing Settings - Buffalo HD-H Series User Manual

Chapter 4 Advanced Settings

Changing Settings

To change the settings of the unit, use the LCD panel in front of the unit.
1
Open the front panel and turn the unit on while holding down the init button.
"ARRAY PARAMETERS SETTING!" will be displayed on the LCD panel.
ARRAY PARAMETERS
SETTING!
2
Show the desired settings by pressing the mode button.
3
Press the select button and choose the value.
4
To change other settings, show the options on the LCD panel by pressing the mode button.
5
Press the mode and select buttons at the same time to save settings.
The settings will be configured.
6
Restart the unit when "POWER DOWN PLEASE!" is displayed on the LCD panel.
POWER DOWN
PLEASE!
20