Table of Contents
Advertisement
1
Open the front panel and turn the unit on while holding down the init button.
"ARRAY PARAMETERS SETTING!" will be displayed on the LCD panel.
ARRAY PARAMETERS
SETTING!
2
Press the mode button twice and show "RAID MODE" on the LCD panel.
RAID MODE
RAID-6
The messages under "RAID MODE" may be different depending on your settings.
3
Show the desired RAID settings by pressing SELECT button.
Note: This model supports RAID 6, RAID 5, and RAID 0.
4
Press the mode and select buttons on the front panel at the same time.
The settings will be configured.
5
Restart the unit when "POWER DOWN PLEASE!" is displayed on the LCD panel.
POWER DOWN
PLEASE!
6
Format the drive referring to the "Format (Initialization)" section in chapter 7.
19
Advertisement
Table of Contents
