Table of Contents
Advertisement
SELECT SYSTEM MODE
SELECT SYSTEM MODE
Setpoint is displayed on the right side of the screen.
Press ▲/
▼
to scroll through options for system
preferences. The selected option flashes.
Note: System modes available depend
upon which system type is selected in
Service Menus.
PRESS ANY KEY TO BEGIN
System
1.
Press
preferences.
Note: Selected option flashes.
2.
Press ▲/
▼
or Off.
Done
3.
Press
to save changes.
The current setpoint is displayed and only the
selected mode (e.g.,Heat) is applied. "Auto"
mode switches automatically between Heat
and Cool. Auto mode controls the room's
temperature to the programmed Heat and
Cool Setpoints or user selected set point.
"Off" mode disables all thermostat outputs;
and only the zone temperature and clock are
displayed.
to select system
to select Heat, Cool, Auto,
14
Advertisement
Table of Contents
