Io-Link Device Description File (Io-Link Device Description); Parameterisation - Festo CPX-AP-A-4IOL-M12 Operating Instruction

Parameterisation

7.2

IO-Link device description file (IO-Link Device Description)

The "Festo IO-Link Tool" software can be used to configure an IO-Link device è www.festo.com/sp.
8 Parameterisation
Various parameters are available for reading out information about the modules in an automation
system CPX-AP-A and for configuring the modules to the application situation.
AP parameter
ID Parameter
246 Fieldbus serial number
791 Product Key
960 Firmware version
20000 Module code
20022 Configuration of load supply voltage moni-
toring (PL)
20085 Measured value of temperature AP-ASIC [°C] 1
20087 Current measured value of logic supply PS
[mV]
20088 Current measured value of load supply PL
[mV]
20093 Hardware version
1) ro = read only; rw = read write
Tab. 7: Standard parameters
Module parameters
ID Parameter
20022 Configuration of load supply voltage moni-
toring (PL)
20086 Activation of the load supply
20090 Variant switching
20097 Activation of the sensor supply
1) ro = read only; rw = read write
Tab. 8: Module parameters
Festo — CPX-AP-A-4IOL-M12 — 2023-01
Instances Data type Access
1 UINT32
1 CHAR
1 CHAR
1 UINT32
1 BOOL
INT16
1 UINT16
1 UINT16
1 UINT8
Instances Data type Access
1 ENUM_ID rw
4 BOOL
1 UINT32
1 BOOL
1)
Array size
ro –
ro 12
ro 30
ro –
rw –
ro –
ro –
ro –
ro –
1)
Array size
–
rw –
rw –
rw –
9