Io-Link Device Description File (Io-Link Device Description); Parameterisation - Festo CPX-AP-I-4IOL-M12 Manual

Parameterisation

Port Qualifier Information Bytes
Bit Contents
Bit 7 PQ
Bit 6 DevErr
Bit 5 DevCom
Bit 4 Reserved
Bit 3
Bit 2
Bit 1
Bit 0
Tab. 12: Port Qualifier Information (PQI)
7.2

IO-Link Device description file (IO-Link Device Description)

The "Festo IO-Link Tool" software can be used to configure a IO-Linkdevice è www.festo.com/sp.
Search by part number or type, download in "Software" section.
8 Parameterisation
Various parameters are available for reading out information about the modules in an automation
system CPX-AP and adapting the modules to the application situation.
12
Description
Port Qualifier: PD status bit copied from IO-Link device in
CKS
– 0: input data is invalid
– 1: input data is valid
Device Error:
– 1: there is at least one error or warning on the device or
port
– 0: there are no errors or warnings on the device or port
DevCOM:
– 1: device is in status PREOPERATE or OPERATE
– 0: device is not connected or not yet in operation
–
Festo — CPX-AP-I-4IOL-M12 — 2022-03a