Replacing The Clamping Component Module; Replacing Buffer Elements - Festo ELCC-TB-KF-60 F1 Series Repair Instructions

3. Screw in the socket head screw of the clamping and tighten slightly.
4. Mount the second end cap in the same way as the first.
5. Only for cantilever axes with feature P9
Mount the cover strip (
6. Adjust the toothed belt pretension (
5.7

Replacing the clamping component module

1. Carry out preparatory work (
2. Remove the toothed belt from the clamping component modules (
3. Only for cantilever axes with feature P9
Remove cover strip from the end cap (
4. Dismantle end cap (
5. Pull the clamping component module out of the cylinder barrel module.
6. Push the new clamping component module into the cylinder barrel module.
7. Mount end cap (
8. Only for cantilever axes with feature P9
Mount the cover strip (
9. Mount toothed belt (
10. Adjust the toothed belt pretension (
5.8

Replacing buffer elements

1. Use pliers to pull out the buffer elements.
2. Insert the new buffer elements.
40 / 52
Chapter 5.4.2 on page
Chapter 5.1.4 on page
Chapter 4.2 on page
Chapter 5.4 on page
Chapter 5.5 on page 39).
Chapter 5.6 on page 39).
Chapter 5.9 on page 41).
Chapter 5.1.2 on page 27).
Chapter 5.1.4 on page
36).
31).
23).
Chapter 5.1.1 on page
34).
31).
25).
Festo 7ELCC_TB_KFb_en