Setting up the WP820
Charging Station
Plug the power adapter into a power source socket to start using the charging station.
Handset
Please refer to the following steps in order to setup your WP820:
1. Open the battery cover.
2. Insert the battery with the electrodes in the bottom left corner.
3. Close the battery cover.
Note: Please charge the battery fully before using the handset for the first time. (For more information
about the battery, please refer to
Figure 2: Charging Station
Battery
Information.
Figure 3: WP820 Handset Setup
WP820 Administration Guide
Version 1.0.1.15
P a g e
|
17