Call Features; Figure 52: Gxp2200 Shared Call Appearance Web Gui Settings; Firmware Version 1.0.3.2 - Grandstream Networks GXP2200 User Manual

All the users that belong to the same SCA group will be notified by visual indicator when a user seizes the
line and places an outgoing call, and all the users of this group will not be able to seize the line until the line
goes back to an idle state or when the call is placed on hold (with the exception of when multiple call
appearances are enabled on the server side).
In the middle of the conversation, there are two types of hold: Public Hold and Private Hold. When a
member of the group places the call on public hold, the other users of the SCA group will be notified of this
by the red-flashing button and they will be able to resume the call from their phone by pressing the line
button. However, if this call is placed on private-hold, no other member of the SCA group will be able to
resume that call.
To enable shared call appearance, the user would need to register the shared line account on the phone.
In addition, they would need to enable SCA and configure SCA options via LCD or web GUI.
To configure SCA via LCD, go to Settings->Account Preference and select one account first. The tap on
"Shared Call Appearance (SCA)". To configure SCA via web GUI, go to Account page->SIP Settings to fill
out the options in the following figure.

Figure 52: GXP2200 Shared Call Appearance Web GUI Settings

CALL FEATURES

The GXP2200 supports traditional and advanced telephony features including caller ID, caller ID with
caller Name, call forward and etc. To use the following feature code, please make sure "Enable Call
Features" option is set to "Yes" under web GUI->Account page->Call Settings.

Firmware Version 1.0.3.2

GXP2200 USER MANUAL Page 54 of 156