Advertisement
2.
I
NSTALLATION
A.
To install the ATS computer:
(1)
Verify protective covers have been removed from ATS computer.
(2)
Position ATS computer on the mounting tray and slide into electrical connectors.
(3)
Secure ATS computer with retaining knob.
(4)
Restore power (AMM Task 24-00-00-861-801) and verify proper operation of auto throttle
system in accordance with SMM 22-30-00, ADJUSTMENT/TEST.
B.
To install a servo drive sub-assembly motor
NOTE: The replacement of a servo drive sub-assembly motor has no effect on the auto throttle
system rigging, therefore a rigging check will not be required.
(1)
Position plastic shaft adapter removed during motor removal onto servo sub-assembly shaft.
(2)
Position motor and insert motor shaft into shaft adapter, being careful to align fork on shaft
with adapter. Push the motor firmly in place and rotate to same position noted during
removal.
(3)
Install the four cap screws securing motor to servo sub-assembly.
(4)
Attach the flat electrical connector using the orientation noted during removal.
(5)
Secure the motor cover with eight flat-head screws.
(6)
Restore power (AMM Task 24-00-00-861-801) and verify proper operation of auto throttle
system in accordance with SMM 22-30-00, ADJUSTMENT/TEST.
C.
To install a servo drive sub-assembly
NOTE: The replacement of a servo drive sub-assembly has no effect on the auto throttle system
rigging; therefore a rigging check will not be required.
(1)
Position servo drive sub-assembly and secure with the six Allen-head screw/lock washer
combinations.
(2)
Using the modified 3mm Allen wrench (see Safe Flight Repair Procedure R2830), install the
six screws and lock washers that attach the shaft connection to the servo drive.
(3)
Remove the wire supporting the shaft connection.
(4)
Attach the servo assembly harness connector to the support bracket.
(5)
Connect the servo assembly harness electrical connector.
(6)
Restore power (AMM Task 24-00-00-861-801) and verify proper operation of auto throttle
system in accordance with SMM 22-30-00, ADJUSTMENT/TEST.
EFFECTIVITY: TE-22305001-SMM-2
CL-604 SUPPLEMENTAL MAINTENANCE MANUAL
Prepared by DAS-605786-NM
(Figure
(Figure
401):
401):
22-30-00
Page 404
Dec 3/03
Hide quick links:
Advertisement
Chapters
