Introduction; Job Set-Up; Procedure; Job Completion - BOMBARDIER Chalenger 604 Supplemental Maintenance Manual

1. I
NTRODUCTION
A. Purpose
The following procedure gives instructions for replacing the passenger seat belts.
B. Equipment and Facilities Required
(1) Equipment
•
(2) Facilities
•
2. J S -
OB ET UP
A. Position seat back in its full recline position.
B. Remove seat cushion to access belt attachment points.
3. P
ROCEDURE
A. At each belt attachment point, remove cotter pin from seat-belt hook assembly.
B. Disengage hook from attachment.
C. Clip new seat-belt hook assembly to attachment point.
NOTE: Seat-belt hook installs on reclining passenger seat with clip facing down.
D. Secure hook assembly with cotter pin and check seat belt for proper operation.
4. J C
OB OMPLETION
A. Install seat cushion and return seat to upright position.
B. Remove all equipment used for these tasks and return aircraft to its initial condition.
TE-55965000-SMM
EFFECTIVITY:
Revision A
CL-604 SUPPLEMENTAL MAINTENANCE MANUAL
PASSENGER SINGLE SEATS - SERVICING
Standard tool kit
None
25-21-10
Page 301
Nov 10/2006