Removal; Installation - BOMBARDIER Chalenger 604 Supplemental Maintenance Manual

INDIRECT LIGHTS - REMOVAL/INSTALLATION
1. R
EMOVAL
NOTE: See 20-12-00 for lamp replacement instructions.
A. To remove a power supply:
(1) Open and lock out circuit breaker(s) listed in
(2) Remove PSU covers in power supply area (25-26-20).
(3) Disconnect wiring from power supply.
(4) Remove fasteners securing power supply.
(5) Remove power supply.
B. To remove a dimming module
(1) Open and lock out circuit breaker(s) listed in
(2) Remove applicable drawers from lower galley.
(3) Disconnect wiring from module.
(4) Remove fasteners securing module.
(5) Remove module.
2. I
NSTALLATION
A. To install a power supply:
(1) Position power supply and secure with fasteners.
(2) Restore electrical connections.
(3) Perform test in accordance with ADJUSTMENT/TEST.
(4) Close PSU.
(5) Remove all equipment used for these tasks and return aircraft to its initial condition.
TE-55965000-SMM
EFFECTIVITY:
Revision A
CL-604 SUPPLEMENTAL MAINTENANCE MANUAL
(Figure 401):
Table 1.
Table 1.
33-21-02
Page 401
Nov 10/2006