Removal; Installation - BOMBARDIER Chalenger 604 Supplemental Maintenance Manual

COCKPIT LIGHTING - REMOVAL/INSTALLATION
1. R
EMOVAL
A. To remove a map light power supply
(1) Open and lock out circuit breaker(s) listed in
(2) Remove access panel.
(3) Disconnect wiring from power supply.
(4) Remove fasteners securing power supply to bulkhead.
(5) Remove power supply.
2. I
NSTALLATION
A. To install a map light power supply
(1) Position power supply and secure with fasteners to bulkhead.
(2) Restore electrical connections.
(3) Install access panel.
(4) Check on/off and dimmer functions of lighting.
(5) Remove all equipment used for these tasks and return aircraft to its initial condition.
TE-55965000-SMM
EFFECTIVITY:
Revision A
CL-604 SUPPLEMENTAL MAINTENANCE MANUAL
(Figure 401):
(Figure 401):
Table 2.
33-05-00
Page 401
Nov 10/2006