Removal; Installation - BOMBARDIER Chalenger 604 Supplemental Maintenance Manual

CABIN TEMPERATURE CONTROL - REMOVAL/INSTALLATION
1. R
EMOVAL
A. To remove the cabin temperature sensor box:
(1) Open and lock out circuit breaker(s) listed in
(2) Remove dado panel at FS478R (25-27-10).
(3) Disconnect electrical and air connections from sensor box.
(4) Remove fasteners securing sensor box to panel.
(5) Remove sensor box.
B. To remove the temperature control module:
(1) Open and lock out circuit breaker(s) listed in
(2) Remove dado panel at FS428R (25-27-10).
(3) Disconnect electrical connections from control module.
(4) Remove fasteners securing control module to panel.
(5) Remove control module.
2. I
NSTALLATION
A. To install the cabin temperature sensor box:
(1) Position sensor box and restore electrical and air connections.
(2) Install fasteners securing sensor box.
(3) Install dado panel (25-27-10).
(4) Perform Challenger AMM Task 21-61-00-710-801.
B. To install the temperature control module:
(1) Position control module and restore electrical connections.
(2) Install fasteners securing control module.
(3) Install dado panel (25-27-10).
(4) Perform Challenger AMM Task 21-61-00-710-801.
TE-55965000-SMM
EFFECTIVITY:
Revision A
CL-604 SUPPLEMENTAL MAINTENANCE MANUAL
Table 1.
Table 1.
21-61-18
Page 401
Nov 10/2006