DOK-CONTRL-S20*SYS*INS-AP02-EN-P
IndraControl S20 System and Installation
7.7.7
Parallel supply
7.8
Connecting the network
If the maximum current consumption is greater than 8 A for a module, however,
you wish to fully load the module, the supply voltage can be supplied in parallel.
The module can now be loaded with 16 A, maximum.
a1
max. 8 A
a2
max. 8 A
+
U
b1
O
-
b2
Fig. 7-12
Parallel supply of the supply voltage
Your network cable is connected to a controller or bus coupler.
Connect the network according to the module-specific documentation.
Bosch Rexroth AG
Connecting and removing cables
65/122