Bosch Rexroth IndraControl S20 System And Installation Manual page 78

76/122 Bosch Rexroth AG
Grounding and shielding
Fig. 8-5 Snapping on the shield bus holders
A
B
Fig. 8-6 Mounting the busbar
DOK-CONTRL-S20*SYS*INS-AP02-EN-P
IndraControl S20 System and Installation
• Snap the shield bus holder onto the
DIN rail.
• Then snap on the second shield
bus holder.
• Push the busbar into the shield bus
holder.
• Secure the busbar using the SK 5
shield connection clamps included
in the scope of supply.