12/122
Bosch Rexroth AG
The IndraControl S20 product group
3.4
Product description
Versions
Modules with various functions are available within the IndraControl S20 product
group.
The IndraControl S20 module consists of an electronics module, one or several
connectors and a bus base module.
The electronics module can be changed without having to remove a wire from the
connector.
The bus base modules are snapped onto the DIN rail side by side and thus form
the local bus that connects the modules to one another.
4
3
2
1
Fig. 3-2
Components of an IndraControl S20 I/O module
Key:
1
Bus base module
2
Electronics module
3
Connector for connecting the supply voltage
4
I/O connector
Modules are available for the following automation tasks:
•
Controller
•
Bus couplers to integrate the IndraControl S20 station into various networks
(PROFINET, Sercos, PROFIBUS, etc.).
•
Input and output modules for digital and analog signals
•
Modules for temperature recording
•
Module for open and closed-loop control, and position detection
•
Modules for communication
•
...
This product range is growing continuously.
DOK-CONTRL-S20*SYS*INS-AP02-EN-P
IndraControl S20 System and Installation