Use Of The Safety Instructions; Structure Of The Safety Instructions; Explaining Signal Words And Safety Alert Symbol - Bosch Rexroth IndraControl S20 System And Installation Manual

DOK-CONTRL-S20*SYS*INS-AP02-EN-P
IndraControl S20 System and Installation
1

Use of the safety instructions

1.1

Structure of the safety instructions

1.2

Explaining signal words and safety alert symbol

The safety instructions are structured as follows:
Abb. 1-1 Structure of the safety instructions
The safety instructions in this documentation contain specific signal words (dan-
ger, warning, caution, notice) and, if necessary, a safety alert symbol (according
to ANSI Z535.6-2006).
The signal word is used to draw attention to the safety instruction and also provi-
des information on the severity of the hazard.
The safety alert symbol (a triangle with an exclamation point), which precedes the
signal words danger, warning and caution is used to alert the reader to personal
injury hazards.
DANGER
In case of non-compliance with this safety instruction, death or serious injury will
occur.
WARNING
In case of non-compliance with this safety instruction, death or serious injury can
occur.
VCAUTION
In case of non-compliance with this safety instruction, minor or moderate injury can
occur.
NOTICE
In case of non-compliance with this safety instruction, material damage can occur.
Bosch Rexroth AG 5/122
Use of the safety instructions