DOK-CONTRL-S20*SYS*INS-AP02-EN-P
IndraControl S20 System and Installation
4-wire technology
Sensor
IN1
U
S
GND
FE
Fig. 7-18
4-wire connection for digital modules
Fig. 7-18
shows the connection of a shielded 4-wire sensor.
•
The sensor signal is routed to the IN1 terminal point.
•
The sensor is supplied with power via terminal points U
•
The sensor is grounded via the FE terminal point.
Bosch Rexroth AG
Connecting and removing cables
and GND.
S
69/122