38/122
Bosch Rexroth AG
Mounting and removing modules
NOTICE
If the modules tilt, you can damage the contacts.
Place and also remove the modules onto/from the DIN rail vertically.
Fig. 6-1
Placing/removing the module vertically
When using modules in the low voltage area, please also observe
Chapter
"Additional safety notes for the low voltage area" on page
Additionally observe the information in the module-specific data
sheets.
DOK-CONTRL-S20*SYS*INS-AP02-EN-P
Damage to the contacts when tilting
Rexroth IndraControl S20
39.