Color And Marking - Bosch Rexroth IndraControl S20 System And Installation Manual

DOK-CONTRL-S20*SYS*INS-AP02-EN-P
IndraControl S20 System and Installation
5.6

Color and marking

Housing
Connector
Function identification
The following housing colors are currently used for the electronics module:
Color Similar RAL color
Light gray RAL 7035
Zinc yellow RAL 1018
Fig. 5-22 Electronics module housing colors
All connectors for the voltage supply are completely black (RAL 9005).
The bottom parts of the connectors for the I/O connection are black (RAL 9005).
The upper parts match the color of the housing, i.e., light gray or zinc yellow.
The module functions are color coded (1 in
1
Fig. 5-23 Color coding of the module function
The following colors indicate the function:
Color Similar
RAL color
Light blue RAL 5012
Flame red RAL 3000
Signal violet RAL 4008
Pale green RAL 6021
Zinc yellow RAL 1018
Pastel orange RAL 2003
Pure white RAL 9010
Fig. 5-24 Color coding of the module function
Bosch Rexroth AG
Housing versions, design, and dimensions
Use
Standard modules
Safety modules
Fig. 5-23).
1
Function of the module
Digital input
Digital output
Digital input and output
Analog input, temperature recording
Analog output
Function: open and closed-loop control, communi-
cation, position detection
Bus coupler, controller, boost
33/122