Advertisement
STEP 9A
Install the cable tidy tray (3) - Method 1.
B
x8
F
4mm
1. Start screws loosely
Start the screws (B) into the supporting beam (4) with 4mm allen key (F), do not tighten.
Hook one edge of the cable tidy tray (3) under the screw head then press in the other side.
Finally tighten screws with 4mm allen key (F).
STEP 9B
Install the cable tidy tray (3) - Method 2.
Install the cable tidy tray (3) as in
B
x8
Method 1 (Step 9A) above.
C
x8
F
4mm
STEP 10
Install the screen.
H
x8
F
4mm
Loosen the screws on screen brackets (11) with 4mm allen key (F) and adjust
the position according to the thickness of the screen, then fix the screen in
place with self tapping screws (H). Finally slide on the decorative cover.
2. Hook in cable
Hook in one side
tidy tray
Press in the
other side
Tighten
1. Start screws loosely
Start loosely
When the supporting
beam (4) stretches over
1720mm the cable tidy
mounted on the middle of
Do not stretch the
the supporting beam (4).
supporting beam
(4) beyond this hole
Loosen
Tighten
tray (3) needs to be
Screen
ST4.2 x 13 (H)
Decorative
cover
Advertisement
