Advertisement
STEP 6
Install the desktop cross beam (5).
A
x4
F
4mm
STEP 7
Connect cables (6 & 7) to control box.
Connect the desktop cross
beam (5) to the supporting
beam (4) with screws (A)
and tighten the screws
with 4mm allen key (F).
STEP 8
Install the desktop and hand switches (7).
D
x24
Tighten the screws underneath
the central cable tray (10)
with 4mm allen key (F).
The expansion distance of the
supporting beam (4) can be adjusted
according to the actual use.
Connect the desktop cross beam (5) to the supporting beam (4)
with screws (A) and tighten the screws with 4mm allen key (F).
Port for hand
switch (7)
F
Power port
Ports for cables
connected to
lifting columns
(1 & 2)
4mm
Loosen
Adjust
Tighten
Advertisement
